FoundryGeneral® Metal Cleaner 4375 is used as received. It can be applied using either spray or brush applications. To provide proper removal, it is recommended that the product be allowed to set for a period of approximately three (3) to ten (10) minutes, depending on the severity and thickness of the resin to be removed. Due to the relatively slow evaporation rate, when compared to Methylene Chloride based formulas, additional care or air blow off may be necessary before resuming production. Please refer to the MSDS for proper safety instructions.

Spray  or brush  the  metal cleaner directly on the build-up areas. Allow it to soak for 15 minutes.  Remove softened films.

Small parts can  be immersed and soaked in the cleaner.

Remove all excess cleaner residue  before recommissioning the tooling back into  the process.

Foundry Meal cleaner 4375 can also be used for cleaning tooling at the machine to clean resin build up or  blocked vents .

CAUTION : Can attack non metallic parts such as plastic tooling. On plastic tooling such as epoxy or urethane,, use caution and

patch test on a small section or on test panel to assure  it works the  way you want it. Metal cleaner designed to remove resins can attack  plastic tooling and surfaces.