Foundry Metal Casting Chemicals, Metal Casting Supplies,Mold Release Agents
Foundry Metal Casting Chemicals, Metal Casting Supplies,Mold Release Agents Foundry Metal Casting Chemicals, Metal Casting Supplies,Mold Release Agents Foundry Metal Casting Chemicals, Metal Casting Supplies,Mold Release AgentsFoundry Metal Casting Chemicals, Metal Casting Supplies,Mold Release Agents Foundry Metal Casting Chemicals, Metal Casting Supplies,Mold Release AgentsFoundry Metal Casting Chemicals, Metal Casting Supplies,Mold Release Agents



 
 Cold Box
 Mold Release Agent
   Core Pastes, Hot  Shell Adhesives
   Corrosion Inhibitors
 
 Green Sand Partings
   Immersion Cleaners
   Investment Casting
   Metal Cleaners
 
 MuddingCompounds
   No Bake Mold  Release  Agents 
   Pattern Sprays
   Sand Treatment
 
 Steam Cleaner
   Warm or Shell Box  Mold Release Agents


 
World HeadQuarters
General Chemical Corp
12336 Emerson Dr.
Brighton,
Michigan 48116 USA
Tel :
248-587-5600
Fax:
248-587-5606
Email: sales@
generalchem.com
 
 
Sand Casting Parting Release,Green Sand Casting Supplies, Sand Casting
 
FoundryGeneral® Green Sand Parting 103:
  Sand Casting Parting Release,Green Sand Casting Supplies, Sand Casting  
 
Sand Casting Parting Release,Green Sand Casting Supplies, Sand Casting
 
 
Sand Casting Parting Release,Green Sand Casting Supplies, Sand Casting PRODUCT DESCRIPTION:
 
  FoundryGeneral® Green Sand Parting 103 is an economically priced parting for automatic molding machines. FoundryGeneral® Green Sand Parting 103 is typically sprayed every cycle.  
     
  Sand Casting Parting Release,Green Sand Casting Supplies, Sand Casting  
Sand Casting Parting Release,Green Sand Casting Supplies, Sand Casting TYPICAL PROPERTIES:
 
Appearance: clear, colorless to light amber
Odor: mild oil odor
Flash Point: 145°F
Density: 7.15 lbs/gal
VOC: Not determined
pH: NA
 
Sand Casting Parting Release,Green Sand Casting Supplies, Sand Casting RECOMMENDED APPLICATION:

FoundryGeneral® Green Sand Parting 103 is used as received. Prior to application, patterns should be well cleaned of previous release agents and dirt through the use of a solvent. A light film of FoundryGeneral® Green Sand Parting 103 should be applied by spraying a mist onto the pattern. Avoid using too much, as it will eventually lead to a sticky film. Reapply as needed. Please refer to the MSDS for proper safety instructions.
Sand Casting Parting Release,Green Sand Casting Supplies, Sand Casting BENEFITS:
Sand Casting Parting Release,Green Sand Casting Supplies, Sand Casting  Inhibits corrosion of metal patterns
Sand Casting Parting Release,Green Sand Casting Supplies, Sand Casting  Will not build up on metal patterns unless too much is used
Sand Casting Parting Release,Green Sand Casting Supplies, Sand Casting  Will not attack the sand clay bond when used as recommended
Sand Casting Parting Release,Green Sand Casting Supplies, Sand Casting  If sprayed every mold cycle, less parting is needed per mold
Green Sand Parting Foundry Prodcuts MATERIAL COMPATIBILITY:
Avoid heat, sparks and open flames. Avoid strong oxidizing agents (i.e. bleach) and strong acids.
Sand Casting Parting Release,Green Sand Casting Supplies, Sand Casting SHIPPING:
FoundryGeneral® Green Sand Parting 103 is shipped in metal pails and drums.
     
  Note: The information presented herein is our interpretation of certain test results and field experience to date. The information is not to be taken as warranty or representation for which we assume legal responsibility, nor as permission or recommendation to practice any patented invention without a license. It is offered solely for your consideration, investigation and verificatio  
     
 
  Sand Casting Parting Release,Green Sand Casting Supplies, Sand Casting  
  Terms & Conditions | Privacy Policy | Links | Warranty | Sitemap | PRESS RELEASE | FAQ'S | DISTRIBUTOR OPPORTUNITY | PRIVATE LABEL  
  COPYRIGHTS @ 2010 CARPET GENDERAL CHEMICAL CORP. ALL RIGHTS RESERVED