Foundry Adhesive, Sand Casting Supplies, Silica Free Core Paste

	Cold Box Mold Release Agent
	Core Pastes, Hot Shell Adhesives
	Corrosion Inhibitors

	Green Sand Partings
	Immersion Cleaners
	Investment Casting
	Metal Cleaners

	MuddingCompounds
	No Bake Mold Release Agents
	Pattern Sprays
	Sand Treatment

	Steam Cleaner
	Warm or Shell Box Mold Release Agents

Foundry Metal Casting Chemicals, Metal Casting Supplies,Mold Release Agents

World HeadQuarters
General Chemical Corp
12336 Emerson Dr.
Brighton,
Michigan 48116 USA

Tel :	248-587-5600
Fax:	248-587-5606
Email:	sales@ generalchem.com

Foundry Adhesive, Sand Casting Supplies, Silica Free Core Paste

FoundryGeneral® No Bake Core Paste 1000:

Print this page

PRODUCT DESCRIPTION:

FoundryGeneral® No Bake Core Paste 1000 is a ready to use air drying paste that is silica free. It is ideal for automatic dispensing paste that is silica free. It is ideal for automatic dispensing systems since it does not contain material that will abrade or wear out the equipment. FoundryGeneral® No Bake Core Paste 1000 penetrates into the sand matrix to form a strong bond and is primarily used with no bake systems, but can also be used with core oil, hot box and cold box systems. Once completely dry, an inorganic bond is formed which produces very little if any gas evolution on pouring. The set time can be reduced by heating the joining surface to about 250 °F.

TYPICAL PROPERTIES:

Appearance:	Thick, pink paste
Density:	14.65 lbs/gal
Flashpoint:	None
VOC:	0 lbs/gal
pH:	11

RECOMMENDED APPLICATION:

FoundryGeneral® No Bake Core Paste 1000 can be used as supplied with only light mixing or can be thinned with water to achieve desired dimensional tolerance between glued parts. However, additional water toll slow down setting speed. FoundryGeneral® No Bake Core Paste 1000 can be used on oil sand, cold or warm (not hot) shells cores and molds as well as resin or sodium silicate bonded cores and molds. Preheating the surface to be glued for sodium silicate cores will result in maximum strength. Be sure FoundryGeneral® No Bake Core Paste 1000 is fully dry before placing in molds. Please refer to the MSDS for proper safety instructions.

BENEFITS:

No VOC

High tensile strength

Inorganic based

Low gas evolution

Fast air and oven dry properties

MATERIAL COMPATIBILITY:

Avoid strong acids and nonferrous metals such as copper, aluminum and their alloys.

SHIPPING:

FoundryGeneral® No Bake Core Paste 1000 is shipped in plastic pails and metal drums.

Note: The information presented herein is our interpretation of certain test results and field experience to date. The information is not to be taken as warranty or representation for which we assume legal responsibility, nor as permission or recommendation to practice any patented invention without a license. It is offered solely for your consideration, investigation and verificatio

Foundry Adhesive, Sand Casting Supplies, Silica Free Core Paste

	Terms & Conditions \| Privacy Policy \| Links \| Warranty \| Sitemap \| PRESS RELEASE \| FAQ'S \| DISTRIBUTOR OPPORTUNITY \| PRIVATE LABEL

	COPYRIGHTS @ 2010 CARPET GENDERAL CHEMICAL CORP. ALL RIGHTS RESERVED