Foundry Shell Adhesive,Sand Casting Supplies, Vegetable Oil Based Shell Adhesive

	Cold Box Mold Release Agent
	Core Pastes, Hot Shell Adhesives
	Corrosion Inhibitors

	Green Sand Partings
	Immersion Cleaners
	Investment Casting
	Metal Cleaners

	MuddingCompounds
	No Bake Mold Release Agents
	Pattern Sprays
	Sand Treatment

	Steam Cleaner
	Warm or Shell Box Mold Release Agents

Foundry Metal Casting Chemicals, Metal Casting Supplies,Mold Release Agents

World HeadQuarters
General Chemical Corp
12336 Emerson Dr.
Brighton,
Michigan 48116 USA

Tel :	248-587-5600
Fax:	248-587-5606
Email:	sales@ generalchem.com

Foundry Shell Adhesive,Sand Casting Supplies, Vegetable Oil Based Shell Adhesive

INTRODUCTION: Environmental Friendly Foundry Adhesive ,Foundry Core Pastes

FoundryGeneral® Foundry Adhesive 9612 is a ready to use vegetable oil based hot shell core and mold paste.

A foundry can lower emissions and meet environmental regulations by reducing the petroleum content.

When applied to the hot drag of a shell mold, FoundryGeneral® Foundry Adhesive 9612 does not boil or dry out quickly, allowing the operator sufficient time to properly position the hot cope half of the mold. After 45 seconds of curing under pressure in the mold press, FoundryGeneral® Foundry Adhesive 9612 develops an extra strong bond which eliminates metal run outs at the parting line and provides casting dimensional accuracy across the parting line.

PRODUCT DESCRIPTION:

A solvent-based product designed to meet the increasing demands for higher production rates and efficiency. The product exhibits excellent strength with short periods of set time.

Foundry Shell Adhesive,Sand Casting Supplies, Vegetable Oil Based Shell Adhesive

TYPICAL PROPERTIES: Environmental Friendly Foundry Adhesive

Appearance:	Thick, yellow to orange paste
Viscosity:	1o,000 cps
Flash Point:	428°F
Density:	8.14 lbs/gal
VOC:	Not determine
pH:	NA

RECOMMENDED APPLICATION:

FoundryGeneral® Foundry Adhesive 9612 may have a slight separation when received. Mechanical agitation is required to thoroughly remix the paste to a uniform consistency. Five minutes when first put into service and one minute at the start of each shift is recommended

Application of FoundryGeneral® Foundry Adhesive 9612 can be done through a normal foundry type paste bulb or by liquid paste pump. Another application 9612 dispensing the liquid from the liquid applicator by a wiper blade traveling over a perforated template. FoundryGeneral® Foundry Adhesive 9612 can also be accurately printed onto the shell by an appropriately contoured fixture with or without a vibrator. Please refer to the MSDS for proper safety instructions.

BENEFITS:

· Ready to use

· Vegetable oil based

· Low smoke evolution

· Extra strong bond

· Reduces metal run out during pouring shells

MATERIAL COMPATIBILITY:

Avoid heat, sparks and open flames. Avoid strong oxidizing agents (i.e. bleach).

SHIPPING:

FoundryGeneral® Foundry Adhesive 300 is shipped in plastic pails and metal drums.

Note: The information presented herein is our interpretation of certain test results and field experience to date. The information is not to be taken as warranty or representation for which we assume legal responsibility, nor as permission or recommendation to practice any patented invention without a license. It is offered solely for your consideration, investigation and verification.

Foundry Shell Adhesive,Sand Casting Supplies, Vegetable Oil Based Shell Adhesive

	Terms & Conditions \| Privacy Policy \| Links \| Warranty \| Sitemap \| PRESS RELEASE \| FAQ'S \| DISTRIBUTOR OPPORTUNITY \| PRIVATE LABEL

	COPYRIGHTS @ 2010 CARPET GENDERAL CHEMICAL CORP. ALL RIGHTS RESERVED