Foundry Metal Casting Chemicals, Metal Casting Supplies,Mold Release Agents
Foundry Metal Casting Chemicals, Metal Casting Supplies,Mold Release Agents Foundry Metal Casting Chemicals, Metal Casting Supplies,Mold Release Agents Foundry Metal Casting Chemicals, Metal Casting Supplies,Mold Release AgentsFoundry Metal Casting Chemicals, Metal Casting Supplies,Mold Release Agents Foundry Metal Casting Chemicals, Metal Casting Supplies,Mold Release AgentsFoundry Metal Casting Chemicals, Metal Casting Supplies,Mold Release Agents



 
 Cold Box
 Mold Release Agent
   Core Pastes, Hot  Shell Adhesives
   Corrosion Inhibitors
 
 Green Sand Partings
   Immersion Cleaners
   Investment Casting
   Metal Cleaners
 
 MuddingCompounds
   No Bake Mold  Release  Agents 
   Pattern Sprays
   Sand Treatment
 
 Steam Cleaner
   Warm or Shell Box  Mold Release Agents


 
World HeadQuarters
General Chemical Corp
12336 Emerson Dr.
Brighton,
Michigan 48116 USA
Tel :
248-587-5600
Fax:
248-587-5606
Email: sales@
generalchem.com
 
 
Foundry Shell Adhesive,Sand Casting Supplies, Slow Drying Hot Shell Core Plaste
 
FoundryGeneral® Foundry Adhesive 300:
  Foundry Shell Adhesive,Sand Casting Supplies, Slow Drying Hot Shell Core Plaste  
 
Foundry Shell Adhesive,Sand Casting Supplies, Slow Drying Hot Shell Core Plaste
 
 
Foundry Shell Adhesive,Sand Casting Supplies, Slow Drying Hot Shell Core Plaste PRODUCT DESCRIPTION:
 
  FoundryGeneral® Foundry Adhesive 300 is a ready to use hot shell core and mold paste. FoundryGeneral® Foundry Adhesive 300 is a slower version than the 100 through 250 series with a longer open time for very hot shells or in applications where prolonged open times before shells are closed is required. FoundryGeneral® Foundry Adhesive 300 also tends to hold a better bead than the 100 through 250 series.  
Foundry Shell Adhesive,Sand Casting Supplies, Slow Drying Hot Shell Core Plaste TYPICAL PROPERTIES:
 
Appearance: Thick, yellow to orange paste
Viscosity: 21,000 cps
Flash Point: 428°F
Density: 8.3 lbs/gal
VOC: Not determine
pH: NA
 
Foundry Shell Adhesive,Sand Casting Supplies, Slow Drying Hot Shell Core Plaste RECOMMENDED APPLICATION:

FoundryGeneral® Foundry Adhesive 300 may have a slight separation when received. Mechanical agitation is required to thoroughly remix the paste to a uniform consistency. Five minutes when first put into service and one minute at the start of each shift is recommended. Application of FoundryGeneral® Foundry Adhesive 300 can be done through a normal foundry type paste bulb or by liquid paste pump. Another application includes dispensing the liquid from the liquid applicator by a wiper blade traveling over a perforated template. FoundryGeneral® Foundry Adhesive 300 can also be accurately printed onto the shell by an appropriately contoured fixture with or without a vibrator. Please refer to the MSDS for proper safety instructions.
Foundry Shell Adhesive,Sand Casting Supplies, Slow Drying Hot Shell Core Plaste BENEFITS:
Foundry Shell Adhesive,Sand Casting Supplies, Slow Drying Hot Shell Core Plaste Ready to use
Foundry Shell Adhesive,Sand Casting Supplies, Slow Drying Hot Shell Core Plaste Low smoke evolution
Foundry Shell Adhesive,Sand Casting Supplies, Slow Drying Hot Shell Core Plaste Extra strong bond
Foundry Shell Adhesive,Sand Casting Supplies, Slow Drying Hot Shell Core Plaste Reduces metal run out during pouring shells
Foundry Shell Adhesive,Sand Casting Supplies, Slow Drying Hot Shell Core Plaste MATERIAL COMPATIBILITY:
Avoid heat, sparks and open flames. Avoid strong oxidizing agents (i.e. bleach).
Foundry Shell Adhesive,Sand Casting Supplies, Slow Drying Hot Shell Core Plaste SHIPPING:
FoundryGeneral® Foundry Adhesive 300 is shipped in plastic pails and metal drums.
     
  Note: The information presented herein is our interpretation of certain test results and field experience to date. The information is not to be taken as warranty or representation for which we assume legal responsibility, nor as permission or recommendation to practice any patented invention without a license. It is offered solely for your consideration, investigation and verificatio  
     
 
  Foundry Shell Adhesive,Sand Casting Supplies, Slow Drying Hot Shell Core Plaste  
  Terms & Conditions | Privacy Policy | Links | Warranty | Sitemap | PRESS RELEASE | FAQ'S | DISTRIBUTOR OPPORTUNITY | PRIVATE LABEL  
  COPYRIGHTS @ 2010 CARPET GENDERAL CHEMICAL CORP. ALL RIGHTS RESERVED