Foundry Metal Casting Chemicals, Metal Casting Supplies,Mold Release Agents
Foundry Metal Casting Chemicals, Metal Casting Supplies,Mold Release Agents Foundry Metal Casting Chemicals, Metal Casting Supplies,Mold Release Agents Foundry Metal Casting Chemicals, Metal Casting Supplies,Mold Release AgentsFoundry Metal Casting Chemicals, Metal Casting Supplies,Mold Release Agents Foundry Metal Casting Chemicals, Metal Casting Supplies,Mold Release AgentsFoundry Metal Casting Chemicals, Metal Casting Supplies,Mold Release Agents



 
 Cold Box
 Mold Release Agent
   Core Pastes & Hot  Shell Adhesives
   Corrosion Inhibitors
 
 Green Sand Partings
   Immersion Cleaners
   Investment Casting
   Metal Cleaners
 
 MuddingCompounds
   No Bake Mold  Release  Agents 
   Pattern Sprays
   Sand Treatment
 
 Steam Cleaner
   Warm or Shell Box  Mold Release Agents


 
World HeadQuarters
General Chemical Corp
12336 Emerson Dr.
Brighton,
Michigan 48116 USA
Tel :
248-587-5600
Fax:
248-587-5606
Email: sales@
generalchem.com
 
 
FoundryGeneral® Foundry Adhesive 100:
  buy now  
 
print icon
 
 
Foundry Core Pastes , Foundry Adhesives PRODUCT DESCRIPTION:
 
  FoundryGeneral® Foundry Adhesive 100 is a ready to use hot shell core and mold paste. When applied to the hot drag of a shell mold, FoundryGeneral® Foundry Adhesive 100 does not boil or dry out quickly, allowing the operator sufficient time to properly position the hot cope half of the mold. After 45 seconds of curing under pressure in the mold press, FoundryGeneral® Foundry Adhesive 100 develops an extra strong bond which eliminates metal run outs at the parting line and provides casting dimensional accuracy across the parting line.  
Foundry Core Pastes , Foundry Adhesives TYPICAL PROPERTIES:
 
Appearance: Thick, yellow to orange paste
Viscosity: 10,000 cps
Flash Point: 428°F
Density: 8.55 lbs/gal
VOC: Not determine
pH: NA
 
Foundry Core Pastes , Foundry Adhesives RECOMMENDED APPLICATION:

FoundryGeneral® Foundry Adhesive 100 may have a slight separation when received. Mechanical agitation is required to thoroughly remix the paste to a uniform consistency. Five minutes when first put into service and one minute at the start of each shift is recommended. Application of FoundryGeneral® Foundry Adhesive 100 can be done through a normal foundry type paste bulb or by liquid paste pump. Another application includes dispensing the liquid from the liquid applicator by a wiper blade traveling over a perforated template. FoundryGeneral® Foundry Adhesive 100 can also be accurately printed onto the shell by an appropriately contoured fixture with or without a vibrator. Please refer to the MSDS for proper safety instructions.
Foundry Core Pastes , Foundry Adhesives BENEFITS:
Foundry Core Pastes , Foundry Adhesives Ready to use
Foundry Core Pastes , Foundry Adhesives Low smoke evolution
Foundry Core Pastes , Foundry Adhesives Extra strong bond
Foundry Core Pastes , Foundry Adhesives Reduces metal run out during pouring shells
Foundry Warm or Shell Box Release Agent MATERIAL COMPATIBILITY:
Avoid heat, sparks and open flames. Avoid strong oxidizing agents (i.e. bleach).
Foundry Metal Cleaning Chemicals SHIPPING:
FoundryGeneral® Foundry Adhesive 100 is shipped in plastic pails and metal drums.
     
  Note: The information presented herein is our interpretation of certain test results and field experience to date. The information is not to be taken as warranty or representation for which we assume legal responsibility, nor as permission or recommendation to practice any patented invention without a license. It is offered solely for your consideration, investigation and verificatio  
     
 
     
  Terms & Conditions | Privacy Policy | Links | Warranty | Sitemap | PRESS RELEASE | FAQ'S | DISTRIBUTOR OPPORTUNITY | PRIVATE LABEL  
  COPYRIGHTS @ 2010 CARPET GENDERAL CHEMICAL CORP. ALL RIGHTS RESERVED