Cold Box Release Agents

	Cold Box Mold Release Agent
	Core Pastes, Hot Shell Adhesives
	Corrosion Inhibitors

	Green Sand Partings
	Immersion Cleaners
	Investment Casting
	Metal Cleaners

	MuddingCompounds
	No Bake Mold Release Agents
	Pattern Sprays
	Sand Treatment

	Steam Cleaner
	Warm or Shell Box Mold Release Agents

Foundry Metal Casting Chemicals, Metal Casting Supplies,Mold Release Agents

World HeadQuarters
General Chemical Corp
12336 Emerson Dr.
Brighton,
Michigan 48116 USA

Tel :	248-587-5600
Fax:	248-587-5606
Email:	sales@ generalchem.com

Foundry Gendral , Product Descriptions

Lubricant	Operation	Industry	Carrier	Physcial


Metal Cleaners:

FoundryGeneral® Metal Cleaner CM	• Non-chlorinated cleaner • Effectively removes resin from tooling and cores • Remains active on the contaminated surface for long periods of time • Designed for on-line cold box tool maintenance • Amine activated • Use as received			142	7.6	9.7	NA
FoundryGeneral® Metal Cleaner HF	• Non-chlorinated cleaner • Effectively removes resin from tooling and cores • Remains active on the contaminated surface for long periods of time • Designed for on-line cold box tool maintenance • Amine activated • Use as received			145	7.8	8.1	NA
FoundryGeneral® Metal Cleaner 95	• Non-chlorinated cleaner • Effectively removes resin from tooling and cores • Remains active on the contaminated surface for long periods of time • Designed for on-line cold box tool maintenance • Use as received • High flash point			191	8.6	8.6	NA
FoundryGeneral® Metal Cleaner 4375	• Non-chlorinated cleaner • Engineered to remove cold box resins, no bake resins, hot box resin and release agent build-up from metal tooling and build-up in metal core boxes • Remains active on the contaminated surface for long periods of time • Designed for on-line cold box tool maintenance • Amine activated • Use as received • High flash point • Slow evaporation rate • Remains active on the contaminated surface for long periods of time, making it more effective than other cleaners			173	8.5	8.5	NA
FoundryGeneral® Metal Cleaner 4377	• Non-chlorinated cleaner • Engineered to remove resins from tooling and boxes • Designed for on-line cold box tool maintenance • Use as received • High flash point • Slow evaporation rate • Remains active on the contaminated surface for long periods of time, making it more effective than other cleaners			176	8.5	8.5	NA

Immersion Cleaners:

FoundryGeneral® Foundry Cleaner 5095WB	• Aqueous, alkaline formulation to be used in immersion systems • Ready to use • Solvent free • No VOC • Aggressively breaks down urethane resins and release agents • Can be used on screens, vents, and core boxes • Operating temperature 100°F-150°F • DO NOT use on aluminum			NA	0	10	>13
FoundryGeneral® Foundry Cleaner 2988	• Water extended NMP formulation used in immersion systems to clean vents, screens, and core boxes • Ready to use • High flash point • Aggressively breaks down urethane resins and release agents • Operating temperature 100°F-150°F • Non-corrosive • Non-flammable • Reclaimable			250	7.7	8.5	NA
FoundryGeneral® Foundry Cleaner 4950	• High flash point • Low VOC • Ready to use • Water extended NMP formulation for immersion systems • Used to break down urethane resins and release agents • Non-corrosive • Non-flammable • Operating temperature 100°F-150°F • Contains amines and surface active agents			205	6.9	8.7	12
FoundryGeneral® Neutalizing Solution CA-5	• Citric acid based neutralizing solution			NA	0	8.5	2

Steam Cleaning:

FoundryGeneral® Steam Cleaner 3367	• Concentrated, water based cleaner • Used in steam cleaning/pressure washing • Formulated with an internal rust inhibitor to prevent flash rust • Low VOC			NA	0.8	8.8	9

Invesrtment Casting:

FoundryGeneral® Incast Clean 1900	• Micro emulsion designed to increase product life • Based on natural solvent • Concentrated • Superior cleaning ability • Etches wax patterns for investment casting • Pleasant citrus scent • Biodegradable • Reduced VOC			125	3.5	8	9.5
FoundryGeneral® Incast Clean 5798	• Micro emulsion designed to increase product life • Based on natural solvent • Concentrated • Superior cleaning ability • Etches wax patterns for investment casting • Pleasant citrus scent • Biodegradable • Reduced VOC • More concentrated version of Incast Clean 1900			117	4.7	7.7	9.7

Rust Inhibitors:

FoundryGeneral® Rust Inhibitor 2999	• Water soluble • Ready to use • Excellent rust protection for ferrous metals • Prevents flash rust • Reduced VOC • Recommended operating temperature of 50°F-100°F • Can be used in conjunctions with Foundry Cleaner 2988 and Foundry Cleaner 4950			NA	0.6	8.4	8.2
FoundryGeneral® Rust Inhibitor 4288	• Concentrate • Water soluble • Protects ferrous metals • Prevents flash rust • Low voc • Can be applied by dip or spray • Operating temperature 50°F-100°F • Dilution ratio – 1 part inhibitor to 4 parts water			NA	0.3	8.8	8.4

Core Paste & Hot Shell Adhesives:

FoundryGeneral® No Bake Core Paste 1000	• Use in no bake systems • No VOC • High tensile strength • Inorganic based • Low gas evolution • Fast air and oven dry properties • Silica free • Ready to use • Ideal for automatic dispensing • Penetrates into the sand matrix to form a strong bond • Can be used with core oil, hot box, and cold box systems			NA	0	15	11
FoundryGeneral® No Bake Core Paste 1500	• Thicker version of No Bake Core Paste 1000			NA	0	15	11
FoundryGeneral® Foundry Adhesive 100	• Ready to use • Hot shell core and mold paste • Does not boil or dry out • Low smoke evolution • Extra strong bond • Reduces metal run out during pouring shell • Low smoke evolution • Viscosity = 10,000 cps			425	ND	8.6	NA
FoundryGeneral® Foundry Adhesive 150	• Ready to use • Hot shell core and mold paste • Does not boil or dry out • Low smoke evolution • Extra strong bond • Reduces metal run out during pouring shell • Low smoke evolution • Viscosity = 15,000 cps			428	ND	8.8	NA
FoundryGeneral® Foundry Adhesive 250	• Ready to use • Hot shell core and mold paste • Does not boil or dry out • Low smoke evolution • Extra strong bond • Reduces metal run out during pouring shell • Low smoke evolution • Viscosity = 25,000 cps			428	ND	8.6	NA
FoundryGeneral® Foundry Adhesive 300	• Ready to use • Hot shell core and mold paste • Does not boil or dry out • Low smoke evolution • Extra strong bond • Reduces metal run out during pouring shell • Low smoke evolution • Holds a better bead than versions 100-250 • Slower drying than versions 100-250			428	ND	8.3	NA
FoundryGeneral® Foundry Adhesive 9612	• Ready to use • Vegetable oil based hot shell core and mold paste • Can help lower emissions and meet environmental regulations • Will not boil or dry out quickly • Low smoke evolution • Extra strong bond • Reduces metal run out during pouring shells			428	ND	8.4	NA
FoundryGeneral® Green Core Paste Standard	• Solvent based core adhesive • Fast set-up time • High tensile strength • Green color or easy visible inspection • Zero VOC • Viscosity = 35,000 cps			0	0	12	NA
FoundryGeneral® Green Core Paste Thick	• Solvent based core adhesive • Fast set-up time • High tensile strength • Green color or easy visible inspection • Zero VOC • Viscosity = 75,000 cps			0	0	12	NA

Mudding Compounds:

FoundryGeneral® Steel Mudding Compound	• Graphite free • For use in steel foundries, but can be used on all metals • Product fills any crack or defect in the mold or core to prevent any mechanical penetration of metal			NA	ND	14	NA
FoundryGeneral® Stiff Mudding Compound	• Graphite based • For general purpose use with gray and ductile iron • Product fills any crack or defect in the mold or core to prevent any mechanical penetration of metal			NA	ND	14	NA
FoundryGeneral® Soft Mudding Compound	• Graphite based • For general purpose use with gray and ductile iron • Product fills any crack or defect in the mold or core to prevent any mechanical penetration of metal			NA	ND	14	NA

Sand Treatment:

FoundryGeneral® Sand Treatment 16-250	• Lubricant and release agent for green sand, core oil, hot box and sodium silicate sand mixes • Blend of solvent and waxes • Promotes core oil dispersion • Increases lubricity • Increases flow rate • Increases sand density • Reduces sticking which in turn reduces clean up time on equipment • Use as received			126	ND	6.88	NA

Pattern Treatment:

FoundryGeneral® Pattern Spray 1	• Oil and fatty acid based liquid parting agent • Can be used on all mold lines • Multiple partings per application • Minimal build up • Will not attack tooling surfaces • Economical			270	3.05	7.05	NA
FoundryGeneral® Pattern Spray WEB	• Oil in water emulsion • Can be used on all mold lines • Multiple partings per application • Minimal build up • Will not attack tooling surfaces • Low VOC • Non-flammable			NA	3.1	7.7	8

GreenSandPartings :

FoundryGeneral® Green Sand Parting 101	• Inhibits corrosion of metal patterns • Will not build up on metal patterns unless too much is used • Will not attack the sand clay bond when used as recommended • If sprayed every mold cycle, less parting is needed per mold • Used in all types of automatic molding machines			270	ND	7.1	NA
FoundryGeneral® Green Sand Parting 102	• Inhibits corrosion of metal patterns • Will not build up on metal patterns unless too much is used • Will not attack the sand clay bond when used as recommended • If sprayed every mold cycle, less parting is needed per mold • Used in all types of automatic molding machines • LOWER VISCOSITY VERSION OF GREEN SAND PARTING 101			265	ND	7	NA
FoundryGeneral® Green Sand Parting 103	• Inhibits corrosion of metal patterns • Will not build up on metal patterns unless too much is used • Will not attack the sand clay bond when used as recommended • If sprayed every mold cycle, less parting is needed per mold • Used in all types of automatic molding machines • LOWER VISCOSITY VERSION OF GREEN SAND PARTING 101			145	ND	7.15	NA
FoundryGeneral® Green Sand Parting 104	• Highly concentrated • Designed to provide maximum parting efficiency • 1 application will last for 10 molds or more • Inhibits corrosion of metal patterns • Will not build up on metal patterns unless too much is used • Will not attack the sand clay bond when used as recommended • Used in all types of automatic molding machines • Improves sand casting surfaces • Reduces the incident of sand erosion, scabbing and other defects			285	ND	7.25	NA
FoundryGeneral® Green Sand Parting 105	• Contains no aromatic solvent or toxic chemicals • Will not dry out or separate • May be store outdoors • Inhibits corrosion of metal patterns • Will not build up on metal patterns unless too much is used • Will not attack the sand clay bond when used as recommended • Used in all types of automatic molding machines			250	NA	7	NA

Warm or Shell Box Release Agent:

FoundryGeneral® Mold Release 90	• Concentrate • Modified dimethylpolysiloxane fluid • No VOC • Low mold build up • Excellent release of molded rubber • Non-flammable • Provides multiple releases • Application -spray, brush, or wipe			NA	NA	8	9.5

Cold Box Mold Release Agents:

FoundryGeneral® Mold Release EM	• Concentrate • Water based modified dimethylpolysiloxane fluid • No VOC • Excellent release on aluminum, urethane, and metal core boxes • Non-flammable • Provides multiple releases • Application -spray, brush, or wipe			NA	0	8.3	10
FoundryGeneral® Mold Release HP	• Unique blend of silicones in a light aliphatic solvent • Flammable • Provides multiple releases • Non-corrosive solvent system • Rapid drying • No HAP listed ingredients • No chlorinated solvents • Use in all core box processes except SO2 • Excellent release on aluminum, urethane, and metal core boxes			20	5.6	6	NA
FoundryGeneral® Mold Release MSO	• Unique blend of silicones in a petroleum distillate • High flash point • Slow drying • Provides multiple releases • Non-corrosive solvent system • Non-flammable • Non-chlorinated			250	ND	7.2	NA
FoundryGeneral® Mold Release TE	• Unique blend of silicones in trichloroethylene • Used in cold box processes such as iso-cure, carbon dioxide, and sulfur dioxide • Excellent release on aluminum, urethane, and metal core boxes • Provides multiple releases • Rapid drying • Non-flammable • Contains a chlorinated solvent			NA	11.3	12.1	NA
FoundryGeneral® Mold Release 100	• 100% high grade silicone blend • For use on all cold box processes • Has shown to reduce box maintenance by providing a slick non-stick surface • Prevents urethane/sand build-up in vents and screens • Reduces amount of box maintenance and cleaning • Zero VOC • Will not attack tooling surfaces • Ready to use			NA	0	8	NA
FoundryGeneral® Mold Release 200	• More viscous version of Mold Release 100			NA	0	8	NA
FoundryGeneral® Mold Release 007H	• Aerosol mold release agent • Provides multiple releases • Minimum release film build-up • Non-chlorinated • Convenient spray can • Ready to use			0	ND	5.5	NA
FoundryGeneral® Mold Release 168	• Blend of silicones in a medium aliphatic solvent • Used in cold box and no-bake machines • Provides multiple releases • Non-corrosive solvent system • Reduces amount of box maintenance and cleaning • Rapid drying • Use as received			105	5.75	6.55	NA

No Bake No Release Agents:

FoundryGeneral® No Bake Release 5000	• Ready to use • Aluminum flake and silicone release agent • Safe on foam • Rapid drying • Heptane based			20	5.7	6.15	NA
FoundryGeneral® No Bake Release 125-RHP	• Ready to use • Non silicone release agent • Talc based • Rapid drying • Excellent release on wood, plastic and metal core boxes • Formulated for air setting resin systems • Multiple releases with minimal mold build up • Safe for use on foam molds			20	5.1	6.8	NA
FoundryGeneral® No Bake Release 4414	• Ready to use • Aluminum flake and silicone based release agent • Safe on foam • Can be sprayed/brushed on • Better core definition • Rapid drying • Reduces build up on tooling			65	6.05	6.5	NA
FoundryGeneral® No Bake Release 4453	• Ready to use • Aluminum flake and silicone release agent • NOT safe on foam • Rapid drying • Better core definition • Core strips much easier			45	6.9	7.35	NA

Cold Box Mold Release Agent , Foundry Mold Release Agent

	Terms & Conditions \| Privacy Policy \| Links \| Warranty \| Sitemap \| PRESS RELEASE \| FAQ'S \| DISTRIBUTOR OPPORTUNITY \| PRIVATE LABEL

	COPYRIGHTS @ 2010 CARPET GENDERAL CHEMICAL CORP. ALL RIGHTS RESERVED